|
·TMT101
|
Specifications: OEM Temperature Transmitter Module for resistance thermometers(RTD), thermocouples(TC), resistance and voltage transmitter, settable via HART-protocol
Compact design
Expanded resistance input (max 10KΩ)
Expanded voltage input (max 2KmV) |
| U/P:
...... |
|
|
|
·TMT272
|
Specifications: OEM Smart Temperature Transmitter HART TMT272 for Resistance thermometers(RTD), thermocouples(TC), resistance and voltage transmitters, with continuously rotatable backlight LCD display
Expanded resistance input (max 10KΩ)
Expanded voltage input (max 2KmV) |
| U/P:
...... |
|
|
|
|
·TMT132
|
| Specifications: DIN Rail Temperature Transmitter TMT132 with HART-protocol for converting various input signals into a scalable 4 to 20mA analogue output signal |
| U/P:
...... |
|
|
|
·SE12H
|
| Specifications: Input: all of toxic and electrochemical gas sensors and pressure sensor, load cell, strain gauge, magnetic field sensor, differential pressure sensor, resistor of 2/3/4 wires etc. |
| U/P:
...... |
|
|
|
|
·GS32H
|
Specifications: Extremely compact construction
Input:all of toxic and electrochemical gas sensors
Output: 4...20mA
Non-recalibration,plug and measure
Configuration using PC or PDA
Temperature and non-linearity compensation |
| U/P:
...... |
|
|
|
·TMT192
|
Specifications: Temperature head transmitter with HART-protocol for converting various input signals into a scalable 4 to 20mA analogue output signal
Wide voltage supply range
Expanded resistance input (max 10KΩ)
Expanded voltage input (max 2KmV) |
| U/P:
...... |
|
|
|
|
·TMT191
|
Specifications: PC programmable temperature head transmitter for converting various input signals into a scalable 4 to 20mA analogue output signal
Wide voltage supply range
Expanded resistance input (max 10KΩ)
Expanded voltage input (max 2KmV)
Option: LCD/LED display
|
| U/P:
...... |
|
|
|
·LEDD-02
|
Specifications: 2-wire, no additional power supply required
High accuracy and stability
Visible in the dark environment.
16 Bit ADC MCU inside.
The scope of the value can be displayed on the LED is -1.9.9.9. ～ 9.9.9.9.
LED can work at 3mA
|
| U/P:
...... |
|
|
|
|
·LEDD-01
|
Specifications: 2-wire, no additional power supply required
High accuracy and stability
Visible in the dark environment.
16 Bit ADC MCU inside.
The scope of the value can be displayed on the LED is -1.9.9.9. ～ 9.9.9.9.
LED can work at 3mA
|
| U/P:
...... |
|
|
|
·LCDD-02
|
Specifications: 2-wire, no additional power supply required
High accuracy and stability
16 Bit ADC MCU inside
LCDD can work at 3mA
Many kinds of the units can be displayed, such as mA, us, PH, mabr, ect.(Further versions are possible on request.)
Option: Two OPTO switch outputs, with Backlight |
| U/P:
...... |
|
|
|
|
·SE72H
|
Specifications: Output: 4 to 20mA
Supply voltage: 9-45VDC
Operation: PC programmable or PDA
Operating temperature range: -40-85℃
Humidity (non-condensing): 0 to 95%RH
Dimension: Φ64mm
|
| U/P:
...... |
|
|
|
·SE633
|
Specifications: Output: 4 to 20mA
Supply voltage: 9-45VDC
Operation: PC programmable or PDA
Operating temperature range: -40-85℃
Humidity (non-condensing): 0 to 95%RH
Dimension: 21.5mm×40mm
|
| U/P:
...... |
|
|
|
|
·SE62H
|
Specifications: Output: 4 to 20mA
Supply voltage: 9-45VDC
Operation: HART-protocol and PDA
Operating temperature range: -40-85℃
with display: -20-70℃
Humidity (non-condensing): 0 to 95%RH
Dimension: Φ61mm
|
| U/P:
...... |
|
|
|
·SE52H
|
Specifications: Input: all of toxic and electrochemical gas sensors and pressure sensor, load cell, strain gauge, magnetic field sensor, differential pressure sensor, resistor of 2/3/4 wires etc
Backlight LCD display
Output: 4...20mA
Supply: 9...45VDC
Dimension: Φ51mm |
| U/P:
...... |
|
|
|
